Code Alarm 1051 Manual

Posted on by
Error Code 1051

CODE ALARM Installation manual System Layout System Specifications System Arming. The system will ignore all trigger inputs for. Car Security & Remote Start. Replacement Transmitters; Prestige; Code Alarm; FlashLogic Interface; Mobile Video. Custom Headrest Systems; Audiovox; Movies2Go. Code Alarm Owners and Installation Guides. Realtek Media Player For Xp. CODE ALARM Installation manual System Layout System Specifications System Arming. The system will ignore all trigger inputs.

• PROFESSIONAL SERIES ca 1051 Owner’s Guide Vehicle Security and Keyless Entry System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.

• Table of Contents Using Your Remote Control.. 3 Arming the Security System..3 Passive Arming Bypass..3 Bypassing the Shock Sensor..3 Hidden Alarm Function..3 Disarming the Security System..3 Valet Mode..4 Manually Overriding the Security System. • Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second.

Code Alarm Manual Owners Manuals

• Valet Mode When valet mode is activated the status LED will light solid, and all security functions will be disabled. To enter or exit valet mode simply follow the 4 steps outlined below: Turn the vehicle’s ignition ON. Push and hold the programming/valet button. The LED will turn on solid when valet mode is active Release the programming/valet button. Audi 80 Engine Manual on this page.

• Using the Personal Protection Alarm (Panic) Press and hold the button for 3 seconds to activate the personal protection alarm. During panic mode, the normal function of the transmitter buttons will be suspended. The transmitter’s buttons can be used to lock and unlock the door (if the option is installed). • LED and Siren/Horn Indications LED Display Indications Function DISARMED SLOW FLASH ARMED FAST FLASH PASSIVE ARMING ON (SOLID) VALET MODE 2 FLASH. PAUSE ZONE 2 TRIGGER, HOOD/TRUNK 3 FLASH.